GMT Hand / Rolex Explorer II

How to set the GMT hand on a Rolex Explorer II

For the modern Explorer II, ref. 226570 (calibre 3285) and 216570 (calibre 3187). Pick your time zones and follow the drawing.

Local time --
On the 24h bezel --

On this watch the hour hand jumps on its own. You'll set the orange hand first.

GMT 24 HOUR 16
Crown Screwed in Unscrewed 1 click out 2 clicks out
Goal when you're done
Hour hand--
Orange hand--
Date--
Step 1 of 5

Unscrew the crown

Turn the crown toward you until it pops out. Don't pull it yet.

Uses your device's clock and time zone. Nothing is sent anywhere.

Written steps

The Explorer II has a fixed 24-hour bezel, so everything is done with the crown. The orange hand reads against the bezel.

  1. Unscrew the crown Turn the crown toward you (counterclockwise) until it springs out. This is the winding position.
  2. Pull the crown out to the second click The seconds hand stops. Turning the crown now moves the hour, minute and GMT hands together.
  3. Set the GMT hand and the minutes Turn the crown until the 24-hour GMT hand points to your home time on the bezel and the minute hand shows the correct minute. Ignore the hour hand for now.
  4. Push in to the first click and jump the hour hand Turn the crown. The hour hand jumps in one-hour steps, forward or back, without disturbing the minutes or the GMT hand. Stop at your local hour. The date changes each time the hour hand passes midnight, so keep jumping (24 clicks per day) until the date is right.
  5. Push the crown in and screw it down Press the crown against the case and turn it clockwise until it is snug.

Explorer II crown positions

PositionWhat turning the crown does
Screwed downNothing. This keeps the watch water resistant.
UnscrewedWinds the mainspring.
First clickJumps the hour hand one hour at a time, forward or back. The date follows when it passes midnight.
Second clickStops the seconds and moves the hour, minute and orange 24-hour hands together.

Questions

Do older Explorer IIs set the same way?

The 16570 and 16550 do: their hour hand jumps on its own, just like the 226570 and 216570. The vintage 1655 is different. Its orange hand is geared to the hour hand and can't be set separately, so it only shows AM/PM. Pick "1655 (vintage)" in the watch list above for its steps.

Does the Explorer II bezel rotate?

No. The modern Explorer II has a fixed steel 24-hour bezel, so the orange hand tracks one extra time zone. The GMT-Master II has a rotating bezel, which lets you read a third.

Why does my date change at noon instead of midnight?

The hour hand is 12 hours off. On a watch where the hour hand jumps, move it 12 more hours in the first crown position. On a watch where the GMT hand jumps, pull to the second position and wind the hands around 12 hours.

I set the date by jumping the hour hand. Is that normal?

Yes. The Explorer II has no separate date setting. The date is tied to the hour hand, so jumping it past midnight moves the date forward (or back, going the other way).

Can I use the GMT hand as an AM/PM indicator?

Yes. Set the GMT hand to your local time. It goes around once a day, so it shows whether it's day or night where you are. Pick "Same as local" in the tool above.

What do I change when daylight saving time starts or ends?

On a watch where the hour hand jumps, just jump the hour hand one hour in the first crown position. The minutes, seconds and GMT hand don't move. On a watch where the GMT hand jumps, reset the local time in the second position, then fix the GMT hand.

Other watches