GMT Hand / Rolex GMT-Master II

How to set a Rolex GMT-Master II

For calibre 3285 and 3186 models: 126710, 126711, 126715, 126720 and 116710. Zero the bezel first, then follow the drawing.

Local time --
On the 24h bezel --

On this watch the hour hand jumps on its own. You'll set the orange hand first.

GMT 24 HOUR 16
Crown Screwed in Unscrewed 1 click out 2 clicks out
Goal when you're done
Hour hand--
Orange hand--
Date--
Step 1 of 5

Unscrew the crown

Turn the crown toward you until it pops out. Don't pull it yet.

Uses your device's clock and time zone. Nothing is sent anywhere.

Written steps

The orange (or green, on the 126720) hand reads against the rotating bezel, so start with the triangle at 12.

  1. Zero the bezel Turn the rotating 24-hour bezel so the triangle sits at 12. The GMT hand reads against the bezel, so it has to start at zero.
  2. Unscrew the crown Turn the crown toward you (counterclockwise) until it springs out. This is the winding position.
  3. Pull the crown out to the second click The seconds hand stops. Turning the crown now moves the hour, minute and GMT hands together.
  4. Set the GMT hand and the minutes Turn the crown until the 24-hour GMT hand points to your home time on the bezel and the minute hand shows the correct minute. Ignore the hour hand for now.
  5. Push in to the first click and jump the hour hand Turn the crown. The hour hand jumps in one-hour steps, forward or back, without disturbing the minutes or the GMT hand. Stop at your local hour. The date changes each time the hour hand passes midnight, so keep jumping (24 clicks per day) until the date is right.
  6. Push the crown in and screw it down Press the crown against the case and turn it clockwise until it is snug.

Reading a third time zone with the bezel

Once the GMT hand shows home time with the bezel at zero, you can turn the bezel to read a third zone. The bezel clicks once per hour.

  • For a zone ahead of your GMT-hand time, turn the bezel counterclockwise one click per hour.
  • For a zone behind, turn it clockwise one click per hour.
  • Turn it back to the triangle at 12 to read the GMT hand normally again.

Questions

Do the Pepsi, Batman and Sprite set the same way?

Yes. The 126710BLRO, 126710BLNR, 126711CHNR, 126715CHNR and 126720VTNR all use calibre 3285 and set exactly the same way. The left-handed 126720VTNR just has the crown on the other side.

How do I set a vintage GMT-Master (1675, 16750, 16700)?

Those earlier GMT-Masters have no jumping hand. The orange hand is geared to the hour hand, so you set local time normally and then turn the bezel to read home time. Pick "GMT-Master 16700, 16750, 1675" in the watch list above and the drawing walks you through it.

What does the two-color bezel mean?

One color covers daytime (6:00 to 18:00) and the other covers night. It's a quick day/night read for the time zone on the GMT hand.

Why does my date change at noon instead of midnight?

The hour hand is 12 hours off. On a watch where the hour hand jumps, move it 12 more hours in the first crown position. On a watch where the GMT hand jumps, pull to the second position and wind the hands around 12 hours.

What do I change when daylight saving time starts or ends?

On a watch where the hour hand jumps, just jump the hour hand one hour in the first crown position. The minutes, seconds and GMT hand don't move. On a watch where the GMT hand jumps, reset the local time in the second position, then fix the GMT hand.

Other watches