GMT Hand / Tudor Black Bay GMT

How to set a Tudor Black Bay GMT or Pro

For the Black Bay GMT (79830RB) and Black Bay Pro (79470), both with calibre MT5652. The hour hand jumps on its own.

Local time --
On the 24h bezel --

On this watch the hour hand jumps on its own. You'll set the orange hand first.

GMT 24 HOUR 16
Crown Screwed in Unscrewed 1 click out 2 clicks out
Goal when you're done
Hour hand--
Orange hand--
Date--
Step 1 of 5

Unscrew the crown

Turn the crown toward you until it pops out. Don't pull it yet.

Uses your device's clock and time zone. Nothing is sent anywhere.

Written steps

On the Black Bay GMT, zero the rotating bezel first. The Black Bay Pro has a fixed bezel, so skip step 1.

  1. Zero the bezel Turn the rotating 24-hour bezel so the triangle sits at 12. The GMT hand reads against the bezel, so it has to start at zero.
  2. Unscrew the crown Turn the crown toward you (counterclockwise) until it springs out. This is the winding position.
  3. Pull the crown out to the second click The seconds hand stops. Turning the crown now moves the hour, minute and GMT hands together.
  4. Set the GMT hand and the minutes Turn the crown until the 24-hour GMT hand points to your home time on the bezel and the minute hand shows the correct minute. Ignore the hour hand for now.
  5. Push in to the first click and jump the hour hand Turn the crown. The hour hand jumps in one-hour steps, forward or back, without disturbing the minutes or the GMT hand. Stop at your local hour. The date changes each time the hour hand passes midnight, so keep jumping (24 clicks per day) until the date is right.
  6. Push the crown in and screw it down Press the crown against the case and turn it clockwise until it is snug.

Questions

Is the Tudor GMT a true "flyer" GMT?

Yes. Calibre MT5652 lets you jump the local hour hand independently, like the Rolex GMT-Master II, which makes it easy to change time zones when you travel.

Why does my date change at noon instead of midnight?

The hour hand is 12 hours off. On a watch where the hour hand jumps, move it 12 more hours in the first crown position. On a watch where the GMT hand jumps, pull to the second position and wind the hands around 12 hours.

Can I use the GMT hand as an AM/PM indicator?

Yes. Set the GMT hand to your local time. It goes around once a day, so it shows whether it's day or night where you are. Pick "Same as local" in the tool above.

What do I change when daylight saving time starts or ends?

On a watch where the hour hand jumps, just jump the hour hand one hour in the first crown position. The minutes, seconds and GMT hand don't move. On a watch where the GMT hand jumps, reset the local time in the second position, then fix the GMT hand.

Other watches